L.E. Wilson Neck Sizing Bushings

Description

Product Overview

L.E. Wilson hardened stainless steel neck sizing bushings are precision components used in neck sizing dies to dial in neck tension and improve consistency. Made in .001 inch increments, the bushing markings indicate the diameter at the middle of the bushing, and the working surface is reamed with a .003 inch taper for controlled contact along the case neck.

Key Features

• Hardened stainless steel construction for stable, repeatable neck sizing
• Built in .001 inch increments for fine adjustments in neck diameter
• Marked size references the bushing middle for predictable selection
• Reamed with a .003 inch taper to help achieve controlled sizing along the neck
• Can be flipped to produce slightly tighter sizing when brass spring-back increases
• Made to similar specs as Redding neck bushings; not interchangeable with Forster or RCBS dies

Choose the bushing size you need for your brass and bullet setup, and use the taper orientation strategy for last-mile neck tension tuning.